Request a Quote
Athlete training with a weighted head harness
Athlete training with a weighted head harness
Athlete doing weighted dips with a dip belt and a weight plate
Close-up of black leather with orange contrast stitching
Hand stitching a leather component during accessory construction

Neck Harness for Combat Sports and Strength Brands

Our neck harness is cut, padded and assembled in the Oath and Oak Global factory for combat sports brands, strength lines and gyms that sell neck training gear under their own name.

  • Padded neoprene head straps
  • Hook-and-loop size adjustment
  • Steel chain or webbing strap
  • Logo on the crown pad
  • Packed with a usage card
Request a Quote
Request a Sample

What Is a Neck Harness?

It is a padded set of straps worn over the head with a chain or strap hanging in front, where a plate or kettlebell is attached for loaded neck extension and flexion.

Wrestlers, fighters, rugby and football players and strength athletes use it to build neck strength in a controlled way.

Close-up of even contrast stitching on a black leather accessory

What Are the Neck Trainer Specifications?

SpecificationOptions
PaddingNeoprene, commonly about 5 mm, thicker on request
StrapsTwo or three adjustable straps over the crown
AttachmentSteel chain, roughly 30 to 35 inches, or webbing
HardwareD-rings with snap hooks or a carabiner
FitOne size, adjusted with velcro
ColorsBlack or brand colors on the pad

Which Neck Trainer Styles Can You Order?

Athlete setting up a deadlift with a loaded barbell in a dark gym

Chain Harness

A steel chain with snap hooks that holds plates or kettlebells for plate-loaded work.

Strap Harness

A webbing strap in place of a chain, quieter and lighter for home and travel users.

Dual D-Ring Harness

Rings on each side that spread the load evenly across both sides of the head.

Band-Ready Harness

Rings sized for resistance bands so customers can train the neck without plates.

Send Your Specifications
Industrial sewing machine needle stitching a strap

How Is a Neck Trainer Built?

In the Oath and Oak factory, the neoprene crown pad is cut and bound, then joined to webbing straps whose ring tabs are sewn with reinforced box stitching.

The chain or strap clips to those rings, so their stitching is checked on every piece. Hooks, straps and cuffs belong to our wider strength training accessories range.

How Can You Customize Neck Trainers?

ElementCustomization Options
Crown padPrinted or embroidered logo
StrapsWebbing color and woven labels
ChainLength and finish to your spec
HardwareBlack or silver rings and hooks
PackagingBox or drawstring bag with usage card

The full list of logo methods sits on our customization page.

Discuss Your Harness Design

How Are Neck Trainers Packed?

The chain is coiled and bagged separately so it does not scratch the padding, then packed with the straps and a usage card in a box or pouch.

Each pack carries a barcode, and cartons are padded to protect boxes from the weight of the chain.

Stacked kraft retail packaging boxes for private label products

Which Neck Trainer Details Should You Decide First?

Chain or Strap

A chain suits plate loading in gyms, while a strap suits lighter, quieter home training.

Strap Count

Three adjustable straps hold the pad more securely on different head shapes than two.

Safety Card

A clear card should tell customers to start light, move slowly and seek advice if injured.

Industrial sewing machine stitching fabric in a workshop

How Do You Approve the Neck Trainer Sample?

You fit the harness on several head sizes, check padding comfort and strap hold, test the hardware and confirm branding.

Production follows the approved pad, strap and stitch spec, and each lot is checked against the sample. Original harness ideas start inside our product development process.

Request a Sample Harness
Spools of stitching thread in many colors lined up

Which Checks Do Neck Trainers Pass?

These checks apply to each lot under our quality control process:

  • Box stitching at every ring tab
  • Chain links and snap hook action
  • Velcro hold on each strap
  • Pad binding and edge finish
  • Logo placement and usage card

Chain or Strap Attachment: Which Should You Sell?

The attachment decides how customers load the harness and where they train.

FeatureChainStrap
LoadingPlates and kettlebellsLight plates or bands
NoiseRattles during repsQuiet
WeightHeavier packLight and compact
LengthSet by chain linksAdjusted by buckle
CustomerGym and fight camp usersHome and travel users

Some brands list the product as a head harness as well, and offer chain and strap versions side by side.

How Do You Order a Neck Harness in Bulk?

MOQ and timing appear in your Oath and Oak quote and depend on attachment type, padding, colors and packaging.

Send attachment choice, colors and logo files through the form. Boxed units travel to you by air or sea freight.

Get a Bulk Quote
Talk to Our Team
By submitting this form, you agree to our Privacy Policy.

What Else Do Buyers Ask About the Neck Harness?

Still have a question?

Send your product details for a quote, or reach Oath and Oak through the contact page.

Request a Quote
Contact Us

It can be when customers start with very light loads and slow, controlled movement. Anyone with a neck injury should get advice from a doctor or physio before training.

Listed ratings vary widely between brands. We print only a figure your brand has confirmed through testing, and most users train with far lighter loads anyway.

Adjustable velcro straps fit most adult heads. Testing the sample on several head sizes confirms the strap lengths and velcro overlap before production starts on your order.

Yes. Clip-on hardware lets customers swap the chain for a strap or band. Offering spare chains can add a useful accessory sale for your brand.

Wrestling, MMA, boxing, rugby and American football players are core buyers, along with strength athletes who want balanced training across the whole upper body and neck.

Which Related Products Should You Explore?